Operation Manual

Introduction Getting Ready

Taking Pictures

Playback Set Up

GB-13

What Your Camera Can Do | Nomenclature | Names of the menus and icons shown on the screen | LED display | FCC

Compliance Statement for American Users | Handling Precautions

NEXTBACK

Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting

This camera incorporates a safety circuit to protect its microcomputer against strong external static

electricity. Though rarely, it may fail to function because this safety circuit has come into action. In this

case, turn off the camera's power, remove the batteries, reload them and use the camera again.

For best performance, we recommend the use of genuine Rollei accessories. Rollei is not responsible

for any accidents or damage caused by the use of accessories made by other manufacturers or

fashioned by the user.

CAUTION

• Store the camera in a well-ventilated location, avoiding damp or dusty areas,

drawers or boxes containing mothballs, or in laboratories or other locations

where chemicals are handled. Exposure to such chemical fumes can result in

damage to the camera's circuitry, resulting in short circuits and causing the

camera to emit smoke or catch fire.

• Do not leave the camera for long periods in places subject to high

temperatures, such as on a beach in summer or inside a car in full sun, as this

can degrade the performance of the SD memory card or MultiMedia card and

cause camera faults.

• Remove the batteries before storing the camera for extended periods of time,

to prevent battery leakage and resulting damage.

CAUTION

• Rubbing or pressing strongly on the LCD monitor screen can result in damage

or malfunctions. If there is dust or dirt on the LCD monitor, blow it off with a

blower brush. Heavy soiling should be wiped off using soft cloth.

• If the LCD monitor should become broken, take precautions to prevent

personal injury from glass fragments.

• If the LCD monitor breaks and its liquid contacts your skin, quickly wipe away

any remaining liquid and wash the skin with soap and water. If the liquid

should enter the eyes, wash with clean running water for at least 15 minutes,

then seek medical attention immediately.

• Due to the innate characteristics of LCD panels, a few pixels may appear

permanently lighted or may not light at all. This is not a malfunction, and does

not affect the recorded image in any way.

• The LCD monitor may appear difficult to see in some outdoor lighting

situations.

Downloaded from www.Manualslib.com manuals search engine