Operation Manual

Introduction Getting Ready Taking Pictures Playback Set Up
GB-151
[BRIGHT CNTRL] Adjusting the LCD Monitor Brightness | [FORMAT] Initializing Memory Cards | [POWER SAVE] Having the Camera Turn Off Automatically to Save Power | [MODE LOCK] Preserving Your
Function Settings | [BEEP] Adjusting the Volume of the Camera Button Beep | [SHUTTER VOL] Adjusting the Volume of the Shutter Sound | [SELECT LCD] Selecting the Display Used at Startup | [START
SCREEN] Selecting the Startup Screen | [ZLANGUAGE] Selecting the Menu Language | [VIDEO OUT] Setting the Output Format for a TV Connection | [FILE NO.] Starting Image File Numbers from 0001 |
[MODE RESET] Resetting Function Settings
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
[BRIGHT CNTRL] Adjusting the LCD Monitor Brightness
You can adjust the LCD monitor brightness through 5 levels. Set the
brightness to your preferred level.
1 Set the mode select dial to "G" and
turn the camera on.
2 Press the up u or down d button to
select [BRIGHT CNTRL] and then press
the right button r.
3 Press the up u or down d button to
select the desired brightness and then
press the OK button E.
The selected brightness is set and the Set Up menu screen reappears.
[+2] : Sets the maximum brightness.
[+1] : Sets the brightness slightly higher than normal.
[STANDARD]: Normal level of brightness. (Default)
[-1] : Sets the brightness slightly lower than normal.
[-2] : Sets the minimum brightness.
BNote
This setting is retained when you turn the camera off.
AF MODE
BRIGHT CNTRL
DATE
DIGITAL ZOOM
FORMAT
SAF
STANDARD
2004.01.01
ON
EXECUTE
POWER SAVE 3MIN.
SET UP(1/3)
AF MODE
BRIGHT CNTRL
DATE
DIGITAL ZOOM
POWER SAVE
SAF
SET UP(1/3)
FORMAT
+
2
+
1
-1
-2
STANDARD
Downloaded from www.Manualslib.com manuals search engine