Operation Manual

Introduction Getting Ready
Taking Pictures
Playback Set Up
GB-63
Taking Still Images
|
Using Continuous Shooting Mode
|
Shooting Movies
|
Selecting Scenes to Automatically Set the Focus and Flash
|
[
k
] Using Self-Timer
|
Using Zoom (Wide-angle and
Telephoto)
|
Using Flash
|
Adjusting Brightness
|
Setting Focus
|
Displaying Information on the LCD Monitor
|
Selecting the Number of Pixels (Image Size) and the Quality
|
Adjusting Image
Colors and Other Settings
|
Switching Display Screen (Electronic Viewfinder and LCD Monitor)
|
Setting the exposure and focus during continuous shooting (Drive mode)
NEXTBACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
5 Press the up u or down d button to
select the desired mode and then press
the OK button E.
The metering mode is set.
(No icon) [EVALUATION]: The entire screen is partitioned into 256
zones and the light in each zone is measured
to determine the optimum exposure for the
subject. (Default)
[G] [CENTER] : The exposure is determined by measuring
the light and giving greater weight to the
central part of the screen (an area larger
than that used for spot metering).
[q] [SPOT AREA] : The exposure is determined by measuring
the light at the center of the screen.
6 Press the MENU button K.
The icon for the selected metering mode appears on the LCD monitor.
[LONG EXP.] Using Slow Shutter Speeds to Shoot Dark
Subjects
«Applicable mode: S»
This mode uses a slow shutter speed when you take pictures of subjects
such as stars at night or weak lights in a dark situation (e.g. candles). The
slower the shutter speed
, the longer the subject's image is exposed.
A Important
This setting is retained when you turn the camera off.
A Important
For long-exposure shots, always place the camera on a tripod to take the shot.
Remove the lens cap before turning the camera on.
EVALUATION
CENTER
SPOT AREA
FOCUSING WIDE AF
SETTINGS(2/2)
LONG EXP. OFF
ISO
AE MODE
METERING
Downloaded from www.Manualslib.com manuals search engine