Operation Manual

Introduction Getting Ready Taking Pictures Playback Set Up
GB-82
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [ k ] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto)
| Using Flash | Adjusting Brightness | Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality | Adjusting Image
Colors and Other Settings
| Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
NEXTBACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
1 Set the mode select dial to "S" or "I" and turn the camera
on.
2 Press the MENU button K to display the menu icons.
3 Use the left l or right r button to select
[SETTINGS] K and then press the OK
button E.
4 Press the up u or down d button to
select [CHROMA] and then press the OK
button E.
5 Press the up u or down d button to
select the desired mode and then press
the OK button E.
The chroma is set.
[H+1] [+] : Increases the color intensity.
(No icon) [STANDARD] : Uses the standard color intensity. (Default)
[H-1] [-] : Decreases the color intensity.
6 Press the MENU button K.
The icon for the selected intensity appears on the LCD monitor.
A Important
•In "S" mode, this setting is retained when you turn the camera off.
•In "I" mode, this setting reverts to its default value when you turn the camera off.
SETTINGS
CHROMA
SHARPNESS
CONTRAST
WB PRESET
STANDARD
STANDARD
STANDARD
SET
COLOR MODE COLOR
SETTINGS(1/2)
SHARPNESS
CONTRAST
WB PRESET
-
STANDARD
SET
COLOR MODE +
SETTINGS(1/2)
CHROMA STANDARD
+1
Downloaded from www.Manualslib.com manuals search engine