Operation Manual

21
E
Using the Self-Timer
When the self-timer is set, the camera automatically takes a shot after 10 or 2
seconds. This allows you to get into the scene when taking group images.
1. Secure your camera to a tripod or place it
on a stable surface.
2. Turn the camera on by sliding the
switch, and set the mode dial to the
Record mode or the Manual Record
mode.
3. Press the button.
 You may select or self-timer mode
by toggling the button.
 The selected self-timer mode is
displayed on the LCD monitor.
4. Compose the scene.
5. Press the shutter button.
 The self-timer function is activated.
 The photograph is then taken after the preset time.
 To cancel the self-timer at any time, press the button or the menu
button.
• After an image is taken using self-timer, the self-timer mode is turned off.
• If you wish to take another image using the self-timer, repeat these steps.
• When the self-timer is set for 10 seconds, the self-timer lamp blinks relatively slow for 7
seconds and then blinks rapidly for the last 3 seconds.
NOTE