Operation Manual

38
39
Shooting
Press Power switch to turn
power on.
An image will appear on
Monitor display in 1-2sec.
Unfold Crank handle as
shown (Arrow ① ) and turn it
360° clockwise (Arrow ② ) .
*Turn the handle before
shooting each picture.
Otherwise the shutter
remains locked.
Winding Crank handle
Shutter release button
Shooting
When composition is decided
depress the shutter button all
the way.
Display will show:
“FOCUSING”
↓
“CAPTURING”
↓
“SAVING”
Power switch
*Focusing may take longer
time under low light
conditions.
*Image may be captured even
when the shutter button is
not fully depressed, but crank
handle may not be released
in this case.
About focus-lock
When the shutter release
button is depressed, the
“FOCUSING” signal is
displayed once. Focusing is
completed when the display
disappears, and the camera
is in a focus-lock condition.
Remove your finger from
the shutter release button to
capture ( “CAPTURING” )
and save the image
( “SAVING” ).
Refer to P46 for proper ways