Operation Manual

The shutter of your Rollei Prego remains locked...

›

if there is no battery loaded or the battery is empty,

›

if the lens cover is closed (the camera switched off),

›

during zooming or film rewinding,

›

while the flash is being recharged,

›

while the film compartment is open.

Your Prego is electronically controlled by a microcomputer.

In rare cases, strong electrical or magnetic fields may pose

a problem. Remove the battery for 2 – 3 minutes. The ca-

mera should function normally after reloading the battery.

The camera

›

Never try to disassemble the camera. It contains high-

voltage circuits that might pose a health hazard. Also,

disassembling the camera would void your warranty.

›

To avoid electrical shocks, do not touch any interior

parts should the body be damaged.

›

For the same reason, immediately remove the battery

if the camera should get wet.

GENERAL

Hints on battery

›

The camera needs battery power to operate.

›

When loading the battery, watch out for correct polar-

ity.

›

The battery must not be

recharged,

short-circuited or opened,

thrown into fire,

exposed to humidity,

disposed of with household garbage.

›

Keep batteries out of reach of children.