Operation Manual

42
Please note:
The camera will work only with batteries loaded.
The lens cover automatically opens and closes when
the camera is switched on or off. Do not try to operate
the lens cover manually!
Without film in the camera, the shutter can be
released, but film-winding functions are inoperative.
The shutter will not operate in the following cases:
When no batteries are loaded or the batteries are
almost exhausted.
When the lens cover is closed.
During zooming, film winding or rewinding.
If the film is left in the camera after rewinding.
While the flash is recycling.
The camera is electronically controlled by a micro-
computer. In the unlikely case of very strong static
electricity, this may fail to operate. Should this happen,
remove the batteries and replace them after 2 – 3
minutes.