Operation Manual

Inserting the batteries

1. Open the battery-chamber cover by pressing its hole

with a pointed object as shown in Fig. 1.

2. Insert two fresh batteries (type CR-123A or DL-123A)

with their positive and negative poles oriented as

illustrated. Correct polarity is indispensable for

operation of the camera! (Fig. 2)

3. Press the battery-chamber cover shut until it clicks into

place.

Notes

• The batteries need not be removed when the camera

is not in use. The camera will automatically shut down

three minutes after use.

• Changing the batteries in mid-roll will not have any

effect on the film.

Checking battery condition

1. No battery symbol in LCD:

Batteries good.

2. One half of battery symbol black:

Enough power left for a few more

rolls of film, but keep spare

batteries ready.

3. Blinking battery symbol:

Replace batteries.

Notes

• Switch the camera off before exchanging batteries.

• Keep spare batteries ready when shooting at low

temperatures that result in a drop in battery power.

Batteries that fail in the cold will recover at normal

temperature.