SPORTSCAM USER MANUAL
Mounting Accessories 1
Functions Thank you for purchasing this camera! With high-performance chips, this product can produce high-definition videos with excellent continuity of dynamic images. It supports H.264 HD video format and can create sharp photos for you. The unique ultraportable design is adopted for this video camera and it is applicable in various fields to enable your daily life convenient, safe and colorful. Make sure to read this manual carefully and keep properly for reference in the future.
when it is used on the beach or near water, because water, sand particles, dust or component containing salt may damage the video camera. Keep the video camera contaminated free of dust and chemical materials. Place it in a cool, dry and well ventilated place. Do not place the video camera in a high temperature, moist or dusty place to avoid failure of the video camera. Be sure to use the video camera regularly during its long time storage.
The external SD memory card is made of cause loss or damage of your data: precision electronic components. The following situations may 1. Improper use of the memory card 2. The memory card is bent, dropped or collided. 3. Place it under high temperature or moist environment or expose to sunshine directly. 4. Electrostatic or electromagnetic field exists around the memory card. 5. Take out this memory card or interrupt the power supply when this camera or computer is connected to the memory card (i.e.
Support high-speed USB2.0 It supports Micro SD cards with a capacity expansion up to 32G. This product supports video output and live playback functions. Videos can be output to high-definition TVs for playing clear and sharp pictures.
Introduction to Appearance and Keypad Infrared light Camera lens Busy light / charging light Screen-off light Screen-off light switch TFT LCD 6
Microphone Tripod nut Power key Shutter Key HDMI interface MicroSD slot USB interface Reset key 7
Usage __ _____ 1. Charge the built-in lithium battery USB Cable Indicator Light for charging is on. To charge the camera, connect it to the computer. Then, the charge indicator light (red) will be on. After the camera is fully charged, the charge indicator light will be off. In general, it can be fully charged after 2-4 hours.
2. Use of Memory Card 1. Push the Micro SD card into the card slot according to the concave lettering beside the slot of memory card till it is completely inserted. 2. To take out the Micro SD card, gently press the end of the memory card inward and it will pop up. MicroSD card Note: No built-in memorizer is available in this video camera. Make sure to insert memory card before using.
3. Startup/Shutdown 3.1 Startup: Press and hold the POWER button for 2 seconds. The screen of the display is activated and the camera is turned on. 3.2 Shut down: Press the POWER Key once under idle condition, and the camera will be shut down. . 3.3 Auto Screen-off: When the idle time of the camera reaches the automatic screen-off time, it will automatically turn off the screen to save power. After turning off the screen, the screen-off light will beon. 3.4.
4. Conversion Between Function Modes The camera has three modes: video recording mode, photo mode and playback mode. These modes can be switched over by clicking the icon in the upper left corner of the LCD display after startup. Video recording mode Photo mode Vehicle mode Playback mode 5. Indicator light Busy indicator light (blue): When the camera is working (e.g.: recording videos, shooting pictures, automatic screen-off, etc.), the busy indicator light will blink.
6. Video recording mode After turning on the DV camera, it will directly get to the video recording mode. You can start recording videos by pressing the shutter button in the preview state. To stop video recording, just press this shutter button again. When the memory card is full or the battery drops to a low level, the camera will also automatically stop video recording: 1 1 Mode icon: indicating currently in the AVI mode. 2 3 2 Video size: available in FHD/HD(60FPS)/HD(30FPS)/VGA.
7. Photo mode: After turning on the DV camera, it will directly get to the video recording mode. To switch to the photo mode, click the mode icon in the upper left corner of the LCD display. You can shoot a photo by pressing the shutter button in the preview state. 1 Mode icon: indicating currently in the photo mode. 2 Photo size: available in 5M/8M/10M/12M. 3 Counter: Indicating the number of photos to be taken. 4 Indicating the face detection function is activated. 5 Icon for setting the time and date.
8. Vehicle mode: 1 Mode icon: indicating currently in the vehicle mode. 2 Video size: available in FHD/HD(60FPS)/HD(30FPS)/VGA 3 Recording time: indicating the length of remaining time to be recorded. 1 2 3 4 Icon of setting time and date. 5 click this icon, the camera can be flipped 180 degrees to take video normally. 6 Battery icon: indicating the current capacity of the battery. 7 Playback icon: to activate the corresponding menu by clicking it.
9. Playback mode: 9.1 After turning on the camera and enabling the Preview state, press the Playback icon ( right corner of the LCD display to activate the menu ( ). Click the file list mode. Then you can playback video clips by clicking a file name in the list.
9.2 Playback movie clips: In the playback mode, click it to fast rewind. Click STOP to pause. After selecting the fast playback function to exit the playback mode to return to the list mode. , click it 9.3 Playback photos: After turning on the camera and enabling the Preview state, press the Playback icon ( right corner of the LCD display to activate the menu ( ). Click the playback mode. Then you can view photos by clicking the icon "◄" or "►".
9.4 File deletion: After clicking the Delete File icon , the screen will appear as shown in the right figure: Click YES to delete the current file immediately, or click NO to cancel the deletion operation.
Connecting the camera to a high-definition TV: Connect the camera to a high-definition TV with a HD cable (as shown below). Then video signals from the camera will be automatically output to the high-definition TV, and you can enjoy HD videos and photos that you have recorded on the high-definition TV.
Application on the personal computer___ ____ Connect the camera to a PC The camera is provided with the plug and play function . Connect the device to the computer with USB line under turning-on state, then it will be switched into the movable hard disk mode. Icon of movable disk will appear on the window of “my computer”. The photos you have taken can be saved in the removable disk under the file folder I:\jpg (“I” is the removable disk of the camera).
2 Use of remote control: Using the remote control will help you realize video recording, photo snapping and shutting down functions without operating the camera itself.While using the remote control, place its signal transmitter port toward the infrared signal receiver light of the camera. Then you can record videos, take photos or shut down the camera by pressing the corresponding buttons.
Waterproof Case Using Notice Before sealing the waterproof case, keep the camera housing’s rubber seal clean, a single hair or grain of sand can cause a leak. You can test by closing the case without inserting the camera. Submerse the case completely in water for about a minute. Remove the case from the water, dry off its exterior with a towel, then open the case. If the entire interior is dry, the case is safe for use under water.
Technical parameters Image sensor Function mode Camera lens Digital zooming Shutter LCD display screen Image resolution 5M pixels (CMOS) Video recording, photo, removable disk F3.1 f=2.9mm 4X Electronic shutter 2.4-inch touch screen 12M (4000 × 3000), 10M (3648x2736), 8 M (3264x2448), 5M (2560×1920) VGA: 640x480 (120 frames / sec), HD: 1280x720 (60 frames/sec.) HD: 1280x720 (30 frames/sec), FHD: 1920x1080 (30 frames/sec.
Standard packaging Camera Helmet Mount User manual USB cable 3M Sticker 23 Remote control waterproof case
License Statement The software used in this product is licensed subject to a license pursuant to the GNU – General Public License conditions. We expressly draw attention to the fact that under the GNU – General Public License conditions no liability is accepted. The starting point for the software is the software published online at http://sg-gpl.net/ The software listed there is licensed pursuant to the GNU – General Public License conditions.