Operation Manual

EN-16
Charging the Battery
The AC power adapter may charge the battery or operate the camera as power
supply. Make sure that the power of the camera is off and then insert the battery
before starting.
1. Insert one end of the AC power adapter into the DC IN
5V terminal of the camera.
2. Insert the other end of the AC power adapter into a
wall outlet.
 The status LED flashes green when charging is
started and lights green when charging is
completed. The LED lights red when a charging
error has occurred.
 It is recommended that you fully discharge the
battery before recharging.
 Charging time varies according to the ambient
temperature and the status of battery.
 This camera must be used with the specified battery and AC power adapter for battery
charging. Damage caused by the use of an incorrect adapter is not covered under the warranty.
 The battery may feel warm after it has been charged or immediately after being used. This is
normal and not a malfunction.
 When using the camera in cold areas, keep the camera and battery warm by holding them
inside your outer clothes.