Operation Manual

EN-30
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Slide the mode switch to [ ].
2. Select the image that you want to protect with the
e / f buttons.
3. Press the MENU button.
4. Select [Protect] with the c / d buttons, and press
the SET button.
5. Select [Single] or [All] with the c / d buttons, and
press the SET button.
6. Select [Set] with the c / d buttons, and press the
SET button.
 Protection is applied to the image and the
camera returns to the playback mode.
 The protect icon
[] is displayed with protected
images.
When [All] has been selected,
[] is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
1. Select [Protect] with the c / d buttons from the
playback menu, and press the SET button.
2. Select [Single] or [All] with the c / d buttons, and
press the SET button.
3. Select [Cancel Protect] with the c / d buttons, and press the SET button.

The removal of image protection is executed and the camera returns to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the c / d buttons from the playback menu, and press the SET
button.
2. Select [Select] with the c / d buttons, and press the SET button.
 The images are displayed in the thumbnail display.
3. Select the image you want to protect with the e / f / c / d buttons, and press the
button.
 The protect icon
[] is displayed with protected images. Selecting a protected image
and pressing the button again will cancel the protection. This procedure is
repeated to select multiple images.
4. Press the SET button.
 Protection and cancellation of the protectionare are executed and the camera returns
to playback mode.
 Formatting an SD/SDHC memory card overrides protection, and erases all images regardless
of their protected status.