Operation Manual

EN-35
Erasing in Playback Mode
Erasing single image / Erasing all images
1. Slide the mode switch to [ ].

The last image will be displayed on the screen.
2. Select the image you want to erase with the e / f
buttons.
3. Press the button.
 The deletion menu will be displayed.
4. Select [Single] or [All] with the c / d buttons, and
press the SET button.
 [Single]: Erases the selected image or the last
image.
 [All]: Erases all of the images except for the
protected images.
 [Select]: Erases a number of selected images.
5. To delete single file with voice memo, select
[Delete Voice Memo] or [Delete Single File] with
the c / d buttons, and press the SET button.
 [Delete Voice Memo]: Erases only the
recorded voice memo on the selected image.
 [Delete Single File]: Erases the selected image.
6. Select [Execute] with the c / d buttons, and press the SET button.
 To not erase, select [Cancel], and press the SET button.
Erasing selected images
This erases a number of selected images.
1. Slide the mode switch to [ ].
2. Press the button.
 The deletion menu will be displayed.
3. Select [Select] with the c / d buttons, and press
the SET button.
 The images are displayed in the thumbnail
display.
4. Select the image you want to erase with the e /
f / c / d buttons, and press the button.

The [ ] icon will be displayed. One more
press of the button will cancel the operation.
Repeat this procedure and select all the
images that you want to erase.
5. Press the SET button.
 Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists.
In other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.
SET : Enter
MENU:Exit SET:Enter
Delete Voice Memo
Delete Single File
100-0011