Operation Manual

EN-50
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
 Select the image that you want to print with
the e / f buttons.

Select the [Print Num.] (up to 99) with the c / d
buttons.
 After selecting the desired image and printing
number, press the SET button to confirm.
4. Select [Exit] with the c / d buttons, and press the
SET button.
5. Select [Print] with the c / d buttons, and press
the SET button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
 The [Complete] will be displayed temporarily,
reminding you that the printing procedure is
finished.
 If a print error is detected, the [Print Error] will
be displayed.
 The image printing may be failed if the power to the camera is cut off.
 We recommend that you use the AC power adapter when connecting the camera to the printer.