Practical Use Manual

57
Spot metering
When shooting against the light or with high-
contrast subjects, important subject detail may
be metered with the central spot-metering
cell alone (< 1% of image area, as referred to
6x6cm format). Brightness in the 5mm centre
circle is then weighted with 100%. However,
using spot metering requires a certain measure
of experience.
Set switch 57 to to activate this mode.
The corresponding symbol will appear on the
display.
EXPOSURE MODES
Centre-weighted multizone metering
Here all seven silicon photodiodes are active.
50% of metering sensitivity are concentrated
on the centre of the frame. The remaining
metering areas are weighted with also 50%.
This metering pattern is recommended for shots
in which exposure should be adjusted to a nar-
rowly limited subject area.
Set switch 57 to .