Owner`s manual

44
45
Caution
Selecting frequency (for fluorescent lamp)
While the camera is in Record
mode, press Left button to
select frequency for shooting
under fluorescent lamp(s).
50Hz and 60HZ alternately
appears on the monitor for
selection.
*This is to prevent the
flickering of light under
fluorescent lamp(s). Except for
high-frequency fluorescent
lamp(s), stripes may appear
across images captured under
normal fluorescent lamp(s) at
the incompatible frequency.
Even set at the correct
frequency, stripes may appear
under strong fluorescent
lighting.
Left button (reverse)
The camera, when left without operation for longer than 60sec,
automatically activates Auto power-off circuitry to turn power off.
Press Power switch again to resume operation.
Auto power-off