User manual

36
37
Strap bracket
Power switch button
When the battery is almost
drained, the battery icon gives
a warning signal by blinking
( ). (Replacing the battery
at this point with a new one is
recommended.) Then, before
the battery is completely
drained, the icon flashes
( ) and the power is
automatically turned off.
* When you do not use the
camera for a long time, be sure
to remove the battery from
the camera in order to prevent
battery drain.
Mode shift button
Preparation
① Put the string attached to
the strap through a Strap
bracket and let the strap
go through the loop as
shown.
② After attaching a strap
to both brackets (right
and left) put the straps
together and adjust length
as shown.
Attaching Neck straps
Push the Power switch
button to turn the camera on.
WELCOME sign appears on the
monitor.
Another push on the button
turns power off.
Power will be cut when
the power source button is
depressed continuously while
the power source button is
turned on.
*When the camera is idle for
longer than 60sec, power will
automatically be turned off.
Turning on and off the power
Pushing Mode shift button
will alternately shift the
mode between Record and
Playback.
* You cannot shift to Playback
mode when no image is
stored.
Shifting modes
Warning battery status