Full Product Manual

17
RolliBot RolliCOOL 208-20 Portable AC User Manual
Using the Upper & Lower Drainage Openings
1. Turn o and unplug the unit, then move it to a
suitable location for drainage. Set a container near
the unit for water runo if needed, then place the
end of the drainage pipe in the container.
2. Remove the cap from the opening and connect
the drainage pipe to the unit via the opening.
Ifthedrainagepipeistoostiand/orcannotbeattached,try
soakingtheendinhotwatertosoftenitrst.
3. Allow the water to drain.
After draining is complete, it is recommended to turn the unit on and
run it in Fan Mode at the lowest speed for at least two hours in order to ensure
the Drainage Pipe dries inside.
4. Detach the pipe and reinstall the cap.
Section 7. Storage
Store your RolliCool 208-20 in a dry, indoor environment. Properly storing your RolliCool will
help improve performance and battery life expectancy.
Step 1. Turn the AC unit o.
Step 2. Remove the exhaust pipe and window kit as needed for storage with the unit.
Step 3. Drain the unit of any water and ensure all parts are completely dry.
Step 4. Turn the unit on and run it in fan mode at the lowest speed for at least two hours in
order to ensure the inner reservoir is dried inside.
Step 5. Turn o the unit and install the power cord’s plug into its xture on the back of the unit.
Step 6. Remove the remote batteries and store separately.
• Alwaysturntheunitobeforetransportingorstoring.
• Covertheunittoprotectitfromdust.Donotstoreinadustyenvironment.Aswithallelectronicdevices,dustmaycause
damage over time.
• Storetheunitindoorsatadryandstabletemperature.Donotstoreinanunheatedgarage,shed,orotherlocationswith
extreme temperature uctuations.