Portable AC with Heater COOL 310-19 USER MANUAL SAVE THIS MANUAL FOR FUTURE REFERENCE In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials. Ver 3.
www.rollibot.
Dear Rollibot RolliCool Owner, Welcome to the new age of cool! The RolliCool 310 is an air conditioner and heater that uses the latest technology to improve your quality of life. We’ve designed this unit to be fully portable and easy to use in your home. It features multiple modes to keep you cool or warm no matter what the weather’s like! The 310 is designed for indoor use and can be used in different sized spaces.
Table of Contents Section 1. Information & Safety Warnings ..............................................................................5 1.1 – Introduction ................................................................................................................5 1.2 – Safety Warnings...........................................................................................................5 1.3 – FCC Information.........................................................................................
Section 1. Information & Safety Warnings 1.1 – Introduction This user manual will guide you through the functions and usage of your RolliCool 310 Portable AC with Heater. It is important that you follow all instructions and pay attention to all notes that appear throughout this manual. Consult this manual before you attempt to use your RolliCool. If you have questions not answered by this manual or are in need of repair or non-routine service, contact customer service at 1-844-585-6295.
• Do not use extension cords etc. Only plug the product into a grounded wall outlet. • Avoid installing the product in damp areas. • Make sure to drain the product with the included drainage pipe 1.3 – FCC Information DECLARATION OF CONFORMITY: This device complies with Part 15 of the FCC Rules.
Section 2. RolliCool Parts 2.1 – Box Contents • • • • • • • 1 x RolliCool 310 Portable AC with Heater 1 x Remote Control 1 x Drainage Pipe 3 x Air Filters (pre-installed) 1 x Heat Exhaust Pipe Window Kit Parts Drainage Parts Cool Window Kit Parts Drainage Parts Heat Fan Dry Swing Sleep Drainage Pipe Heat Exhaust Pipe ℃ Remote Control Window Kit RolliCool 310 Portable AC with Heater 2.
7 Upper Filter 8 Upper Drainage Opening 9 Air Vent 7 10 Lower Filter 11 Lower Drainage Opening 8 12 Handle 12 9 13 Power Plug Fixture 13 14 Air Vent 14 10 15 Power Cord 11 15 2.3 – Control Panel The 310 features a digital control panel which turns on when the unit turns on and includes buttons. Buttons & Parts 1 2 3 4 5 6 7 1 Timer Button: Press to turn timer mode on or off. 2 Fan Button: Press to turn on fan mode and cycle through 3 fan speeds.
2.4 – Remote Overview The 310 features a remote with a digital display which may be used with the unit. Remote Buttons Timer Button: Press to turn timer mode on or off. Cool Mode Button: Press to cycle between cool, dehumidify, heat, Heat Fan Dry and fan modes. Vent Button: Press to turn open or close the louvres. Swing Sleep Sleep Button: Press to turn on sleep mode. Power Button: Press to turn the unit on or off. -/+ Press to lower or raise temperature or adjust timer duration.
Section 3. Setting Up the Unit • • • • Before using the unit, keep it upright for at least two hours. Do not use extension cords etc. Only plug the unit into a grounded wall outlet. Do not use the unit in bathrooms or other excessively humid environments. After installation, keep the unit at least 20 in. from the walls at all times. Window Kit Parts A B Screw Head Washer Screw Base Sections Screw Fastener These sections thread into one another and should be placed within a window gap.
Step 3. Attach the wheels (if needed) and roll the unit into the desired room. In the moving process, ensure that the unit is in an upright position and the RolliCool is placed on a flat surface. Step 4. Attach the included heat exhaust pipe to the air vent on the back of the unit. Unfold the pipe to the necessary length. Step 5.Install the assembled kit into a gap between the window and the frame and push the window nearly closed to secure it.
Step 6. Attach the heat exhaust pipe to the window kit. If desired, add a screw to the end of the heat exhaust pipe to further secure it to the window kit. Make sure the exhaust pipe is not bent or kinked as this may inhibit air flow and/or damage the unit. Section 4. Wireless Setup For your convenience, there is an app for this device. The app is compatible with most Android and iOS smartphones. Additionally, the unit can also be paired with Alexa and other products from the Amazon Echo Family. 4.
Step 1. Turn on the AC unit then use your phone to turn on Bluetooth® and open the app. Step 2. Register for an account and return to the app (fig.1). Step 3. After logging in, select the desired device type and tap the icon. Step 4. Select the access mode and enter wi-fi and Bluetooth® info as needed (fig.2). Step 5. Turn off the AC unit then press and hold the mode button on the unit’s control panel for ~5 seconds. The app will begin pairing. Step 6.
Section 5. How to Use the RolliCool The 310 features a number of ways to keep comfortable. Most features can be used by pressing the buttons on the unit’s control panel, the remote, or via the app. • In most cases where the remote can be used, the app can also be used as a substitute. • To keep the COOL310 from filling up with water too quickly when certain modes are used, it may be best to attach the drainage hose.
5.3 – Cool Mode With this mode, the unit will turn on and regulate temperature as selected. 1. Press the power button on the control panel or remote. 2. Press the mode button on the control panel or remote multiple times until the display’s “Cool” light turns on. 3. Use the up and down buttons (left/right on the remote) to set the desired temperature 61~88°F (16~31°C). 4. Use the fan button to cycle through fan speeds.
Section 6. Maintenance Proper maintenance will help improve your RolliCool’s performance. Periodically, the RolliCool will need its filters cleaned. For optimal performance, the filters should be cleaned at least twice a month. • If any type of non-routine maintenance is needed, such as any maintenance not described in Section 6 of this manual, please contact customer service or a certified HVAC professional as the unit contains refrigerant. • Wipe the exterior clean with non-abrasive cloth.
6.2 – How to Drain the Unit In most cases, the AC unit will not require draining. In the event that draining is necessary, the unit will sound an alarm and the display’s “Full“ light will turn on to indicate the water reservoir inside is full. • Please make sure your AC unit is completely powered off before performing any type of maintenance. • If relocating the unit before draining, move it carefully so as not to spill the water inside the reservoir.
Step by Step The steps are the same for both the upper and lower drainage openings. 1. Turn off and unplug the unit then move it to a suitable location for drainage. 2. Locate the opening, unscrew the cover, and remove the pre-installed plug. 3. Peel the sticker off the spacer and use the adhesive side to attach it to connector. 4. Thread the connector through the cover. 5. Screw the cover onto the opening. 6. Fit the drainage pipe over the connector.
Section 8. Troubleshooting Problems Possible Causes The unit does not work. The cooling effect is weak. Solution(s) Turn it on after connecting it to a socket There is no electricity. with electricity. The overflow indicator displays. Drain the water inside. Use the unit when the indoor temperature The indoor temperature is too low is between 44-95 0F (7-35 0C ). or too high. Change the set temperature. Cover any direct sunlight coming through There is direct sunlight. the windows.
Section 9. Warranty 9.1 – Violation The RolliCool 310 Portable AC with Heater cannot be repaired or serviced within its warranty period if any of the following has occurred: • The warranty has expired • Damage occurred during or in relation to non-routine and/or unauthorized disassembly • Failure to provide a valid proof of purchase when requesting service or repair • Damage occurred as a result of natural disaster etc.
This Warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to follow the product instructions or to perform any preventive maintenance; (e) modifications; (f ) unauthorized repair; (g) normal wear and tear; or (h) external causes such as accidents, abuse, or other actions or events beyond our reasonable control. Important: Do not disassemble the Product. Disassembling the Product will void this Warranty.
Copyright © 2019. Rollibot, LLC.
