Instructions / Assembly

9
Charging Instructions
ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER.
To Charge the Battery:
1. Ensure the train is stopped and turned
off.
2. Using a at head screwdriver, turn the
screw on the seat lid to the unlock
position and lift lid.
3. Unplug the red battery connector (A)
from the red engine connector (B).
4. Connect the red battery connector (A)
to the red battery charger connector
(C) and plug (D) into a 120 V outlet.
5. Once done charging, unplug the
charger connector (C) from the red
battery connector (A).
6. Reconnect the red battery connector
(A) to the red engine connector (B).
To Remove the Battery:
7. Using a hex screwdriver, unscrew the
hex screw on the battery strap.
8. Slide the battery strap (E) out.
Disconnect the red battery connector
(A) from the red engine connector (B).
9. Remove the battery (F) from the
compartment.
Note: It is not necessary to remove the
battery for charging. However, if the
battery does not reach the outlet, it can be
removed for charging.
YOU MUST CHARGE THE BATTERY FOR 18
HOURS BEFORE THE FIRST USE!
A
B
A
D
C
AB
E
F