User Manual

Rolls Battery has been manufacturing deep cycle lead-acid batteries since 1935.

Experience and commitment to quality has helped us achieve an unmatched

reputation in the industry. Our goal is to provide our customers with a premium

product providing dependable performance and long-lasting cycle life. This manual

provides the recommended setup, charging, Equalization and preventive maintenance

procedures necessary to maximize the life of your Rolls batteries. If you have battery-

related questions beyond the contents of this manual, we encourage you to visit our

online Technical Support Desk (support.rollsbattery.com) for additional information

or file a support ticket and our Technical Support team will be happy to assist you.

EQUIPMENT & SAFE HANDLING PROCEDURE

• Goggles, rubber gloves & rubber boots

• Distilled water

• Baking soda, soda ash

To prevent injury, always wear acid-resistant clothing, PVC gloves, goggles and

rubber boots. Flooded batteries must be maintained in an upright position at all times.

Always have plenty of water and baking soda on hand in the event of an acid spill

during transport.

INSPECTION

When receiving shipment of your batteries, it is important to thoroughly inspect each

pallet, battery and packaging. Before signing acceptance of the shipment, remove the

shrink-wrap from the pallet and inspect each battery for damage (i.e. cracks, dents,

punctures, deformations, acid leaks or other visible abnormalities).

Do not accept shipment if the batteries appear to have been damaged in any way.

Confirm that connection terminals are secure and clean. If the battery is dirty, or if

any minor amount of acid has spilled onto the case due to loose bayonets, refer to the

cleaning instructions in this manual to properly neutralize and clean as necessary. Wet

pallets or signs of acid leak on or around the batteries could indicate shipping damage

or improperly sealed battery casing. Perform a voltage check to confirm the battery

polarity and marking of the terminals are accurate.

In the event of a suspected leak or damage, do not accept the shipment.

Contact your battery retailer or Rolls Battery to determine whether the batter(ies)

require replacement.

Battery shipments which are known to be damaged, but accepted, will not

be replaced under the terms of Rolls Battery manufacturer warranty.

• hydrometer, refractometer

• voltmeter, ammeter

• battery charger