For warranty registration please visit the rolls web site at www.rolls.com. MX34c LiveMix HEADSET MIC 1/8” c 12 VDC CHANNEL 2 INPUTS AUX STEREO IN OUT + - OFF=UP ON=DOWN PHANTOM POWER OUTPUT LEVEL MIC LINE MADE IN USA www.rolls.
SPECIFICATIONS INTRODUCTION Thank you for purchasing the new MX34c LiveMix - two channel microphone mixer. Although having many uses, this little mixer was originally designed with the video camera operator in mind. It’s handy shoulder strap, easy-access microphone Level and Pan controls, and smart Input/Output jack placement make the MX34c ideal for the live recording enthusiast. Two 9 volt alkaline batteries ensure adequate signal strength as well as phantom power for your favorite condenser microphone.
SCHEMATIC DESCRIPTION FRONT PANEL HEADSET MIC 1/8” c MIC1 and MIC2 LEVEL: Adjusts the amount of signal of the indicated Microphone channel. PAN: Adjusts the relative level of signal from the channel to the Right/Left Output. pwr: When lit, indicates that the MX34c is on. A dim light indicates low battery voltage. HEADPHONE LEVEL: Adjusts the amount of signal from the Headphone Output. OUTPUT: 1/8” (3.5mm) jack containing the Headphone Output signal.
OPERATION CONNECTION Connect microphones to the MX34c via balanced XLR cables. Stereo auxiliary sources such as the output from another mixer, AM/FM tuners, CD Players, and MP3 players may be connected to the AUX IN via a stereo 1/8” (3.5mm) Tip-Ring-Sleeve plug. Connect the STEREO OUT to the Input of your recording device also using a stereo 1/8” (3.5mm) Tip-Ring-Sleeve plug. If you wish to use AC power for the MX34c, connect the Rolls PS27 12VDC power supply.