www.rolls.com Hi-Fi Card Reader User’s Guide & Manual 1.
Hi-Fi Card Reader User’s Guide & Manual Index Introduction .......................................................... 3 Main Features ...................................................... 3 Precautions & Maintenance ........................ 4 Getting Started ................................................... 5 1. Power adapter ................................................ 5 2. Hi-Fi connection ............................................ 5 3. Speaker connection ....................................
Hi-Fi Card Reader User’s Guide & Manual Introduction Congratulations on your purchase of this Hi-Fi Card reader. Before operating the unit, please read this manual thoroughly and retain it for future reference. This Hi-Fi Card reader allows you to listen to MP3 music with your home Hi-Fi or PC speakers directly from your USB Flash drives or SD/MMC memory cards. This Hi-Fi Card reader is compatible with USB 1.1/2.0 Flash drive, SD memory cards and Multimedia Card with MP3 music.
Hi-Fi Card Reader User’s Guide & Manual Precautions & Maintenance z z z z z z z z The Card Reader is for indoor use only. Please do not listen to music at extremely loud level, Exposure to loud noise for a prolong period of time may be hazardous to your health. To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. Do not block the ventilation holes on the back of the Card Reader at any time. Keep your Card Reader out of sunlight.
Hi-Fi Card Reader User’s Guide & Manual Getting Started 1. Power adapter Plug the power adapter into an electrical outlet. Only use the adapter that comes with the unit. 2. Hi-Fi connection Use the supplied RCA cable to connect the card reader to a Hi-Fi RCA jack. Alternatively you may also use the 3.
Hi-Fi Card Reader User’s Guide & Manual proceed with the line connection). 3. Speaker connection Connect speakers to the RCA jack or 3.5mm audio-out jack on the back side of the Card Reader.
Hi-Fi Card Reader User’s Guide & Manual 4. Power On Turn on the Card Reader by pressing the power button on the upper right corner. 5. Inserting Memory Cards The Card Reader is compatible with the following Memory cards: z USB Flash drive 1.1 or 2.0 standard Secure digital TM (SD) Card z Multimedia TM( MMC) Card Insert the USB Flash drive and memory card with the label facing top side.
Hi-Fi Card Reader User’s Guide & Manual Note: The Card Reader will only recognize MP3 format music files, digital music in other formats will be ignored by the device.
Hi-Fi Card Reader User’s Guide & Manual 6.
Hi-Fi Card Reader User’s Guide & Manual 6.
Hi-Fi Card Reader User’s Guide & Manual 7. Listening to MP3 music Before you start, you must first store MP3 music files onto a USB Flash drive or SD/MMC memory card. 7.1 Insert the memory media into the Card Reader. 7.2 Press the Play / Pause button on the remote control or on the Card Reader front panel. 7.3 Adjust the volume by using the Volume +/buttons. 7.4 Track forward and backward by pressing the Prev / Next buttons. 7.5 Fast forward or fast rewind by pressing the Prev / Next button for 2 seconds.
Hi-Fi Card Reader User’s Guide & Manual Adjusting the settings will not interfere with music playing. When under Repeat or EQ setting, please following the instructions below: 7.7.1 Repeat mode : press the Prev / Next button to choose between RPT1 (repeat current file), RAND (Random play), RPT All (repeat all files) 7.7.2 EQ setting: press the Prev / Next button to choose between Jazz, Rock, Bass, Normal, Classic mode.
Hi-Fi Card Reader User’s Guide & Manual memory card. 8. Audio Input If you would like to utilize your home stereo speakers to play the music on your portable MP3 music device, using a 3.5mm audio line, simply connect the MP3 device to the audio-in jack on the lower-right corner of the front panel. Music from audio-in will take precedence over SD/MMC and USB music. If you would like resume music from SD/MMC or USB, please remove the 3.5mm audio line from the front panel audio jack. 9.
Hi-Fi Card Reader User’s Guide & Manual detect new hardware found which will be your SD card drive. Now you are ready to transfer music files. 5. After file transfer, please power off the Hi-Fi Card Reader then remove the USB cable. 6. Power on the Hi-Fi Card Reader to start playing music. PC link is subject to the system requirements below: OS: Windows 2000/XP or Mac OS 9 and higher Interface: a available USB 1.1 or 2.0 port 10.
Hi-Fi Card Reader User’s Guide & Manual phones that support streaming stereo music over Bluetooth using A2DP profile). Play MP3s from your home computer or laptop (equipped with Bluetooth) and listen to them over your home Hi-Fi system speakers. 10.1 System requirements There are three types of devices that may connect via Bluetooth to the Hi-Fi Card Reader: 1. PC with Bluetooth adapter supporting A2DP profile 2. Bluetooth phone with A2DP profile 3.
Hi-Fi Card Reader User’s Guide & Manual After pairing is complete, use the remote control to toggle between Bluetooth audio and Card Reader (USB/SD/MMC) audio (remote control button 11).
Hi-Fi Card Reader User’s Guide & Manual 17
Hi-Fi Card Reader User’s Guide & Manual 10.3 Connecting with Computer or Laptop 1. Power on the Hi-Fi Card Reader, as this will also initiate the Bluetooth function. Make sure your Computer/Laptop and the Hi-Fi Card Reader is as close as possible. 2. Initiate Bluetooth software on your Computer and follow the Bluetooth software’s instruction to pair with another device. Search for device named BT Card Reader. 3. Establish connection with the Card Reader 4. Open your music player and start playing music.
Hi-Fi Card Reader User’s Guide & Manual initiate the Bluetooth function. Make sure your Bluetooth Audio Transmitter and the Hi-Fi Card Reader is as close as possible and that no other Bluetooth devices is within the area 2. Initiate pairing on your Bluetooth Audio Transmitter. 3. The LED indicators on your Bluetooth Audio Transmitter will indicate a successful connection. 4.
Hi-Fi Card Reader User’s Guide & Manual 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Rolls Corporation 5968 S 350 W Murray, UT 84107 www.rolls.
