Owner's Manual

Page 2
ZONE
1
2
3
4
MONITOR
MIC 1
OUTPUT 1
ZONE ONE
The front panel LEVEL and ZONE switches are the same for all channels. Simply activate the appro-
priate switches to send that channels information to the required output zone.
The output XLR’s 1-4 are line level balanced outputs.
Q: I am getting distortion out of all of the XLR outputs and the level is very high?
A: You are plugging the line level outputs into something that is MIC level. You will always get distor-
tion and excessive volume. The RM424 is only designed to have a LINE LEVEL output not MIC
LEVEL.
The slotted holes in the back of the RM424 are for the attachment of a wire tie (included on the
PS27s cord) or a small zip tie (not included), for power cord strain relief as needed. Just thread the tie
thru the holes and attach the cord.