Service manual

SERVICE MANUAL
3. ADJUST menu
Table 2 Adjustment Menu
Item Description Bus Data Remarks
MENU 1
AFW AFC bandwidth selection 0 For inspection only
IF-FREQ IF frequency 38 For inspection only
AFA Auto frequency tracing display IN For inspection only
AFB Auto frequency tracing display ABOVE For inspection only
AGC-TAK AGC control data 10 Adjustable
FIX AUD Fixed audio amplitude output 0
VOL_MIN Volume Min. 08 For inspection only
VOL_MID Volume Mid. 27 For inspection only
VOL_016 43 For inspection only
MENU 2
BRI-MAX Brightness Max. 63
BRI-MID Brightness Mid. 31
CON-MAX Contrast Max. 63
CON-MID Contrast Mid. 31
COL-MID Color Mid. 31
MENU 3
PAL NTSC
V-HALF Half vertical picture on/off 0
V-SLOPE Vertical shift 31 Set to optimum
V-AMPL Vertical amplitude 34 37 Set to optimum
S-CORR PAL vertical shift 26 Set to optimum
V-SHIFT PAL vertical shift 24 27 Set to optimum
V-ZOOM Vertical zoom 25 For inspection only
V-SCROLL Vertical captions mode-SCROLL 31 For inspection only
MENU 4
PAL NTSC Set to optimum
H-SHIFT Horizontal shift 24 46 Set to optimum
H-AMPL Horizontal amplitude 46 48 Set to optimum
H-PARAB Pincushion correction 26 Set to optimum
H-CORNER Quadrangle correction 38 Set to optimum
H-TRAP Trapezoidal correction 34 Set to optimum
MENU 5
R-DRV Red drive setup 31 For inspection only
G-DRV Green drive setup 31
B-DRV Blue drive setup 31
Y-DLY Brightness delay setup 8 For inspection only
(continued)
10