Instruction Manual

Power button
Power Indicator
Camera
Speaker
Infrared receiver Microphone array
Reset button*
Ethernet port
Power jack
HDMI 1
USB Type-AHDMI 2
* When the device is plugged in but has not been turned on, use a pin or paper clip to
press and hold the reset button and long press the power button at the same time to reset
the device.
* USB Type-C Port is for data transmission only
Line in
Product overview
Fasten the hinge to the bottom of the device, and then fasten the desktop stand to
the hinge.
①
Adjust the angle of the device so that it stays level on a desktop. Make sure the
device is stable and not shaking. Before using the device, remove the lens cover
and place it on the magnetic area on the right side of the device.
②
Magnetic area
Installing the device
USB Type-C