User's Manual
9
STARTING USE
NOTICE
Before starting to use Romware ONE™, make sure it is fully charged.
See: charging
HANDLE WITH CARE
Handle Romware ONE™ with care. Although Romware ONE™ is designed
to be used in an industrial environment, it contains sensitive electronic
components and can be damaged if dropped, burned, punctured, or
crushed. Avoid heavy exposure to dust or sand. Do not use a faulty or
incomplete product, or when it shows damage such as a cracked case,
liquid intrusion, or a damaged wrist strap.
► Put the wrist strap around either your le or right wrist.
► Put one end through the loop on the other end.
► Hold one finger between the strap and your arm, behind
the clasp. Romware ONE™ should fit snugly around your
wrist, without being uncomfortably tight.
► Push the clasp firmly between your fingers, through the
holes that are most comfortable to wear. Make sure the
clasp is firmly pushed through two holes to prevent it
from coming loose by accident.
► To ensure your safety, the clasp is designed to disconnect
in case Romware ONE™ gets snagged behind for example
moving machinery.
► Turn Romware ONE™ on by pushing the Multi-function
button until the Light-ring indicator lights up blue. Let go
of the button, the light ring indicator starts filling up blue
while the device is starting.
► Aer a few seconds, the Light-ring indicator will briefly
light up green.
► You can now enter the site.
CAUTION