Installation Guide

VITREOUS CHINA VANITY TOP

REV. 160801

PRODUCT INSTALLATION

A RONBOW COMPANY

VANITY TOP

PRE-INSTALLATION

Tools Required

Safety

goggles

Silicone

Compound

WHAT IS COVERED

All products in the package carry a One-Year warranty. This warranty applies only to the original purchaser and to the

original installation of the product.

WHAT IS NOT COVERED

Damage caused during moving or during installation is not a defect or warranty issue and will not be considered as such.

This warranty does not cover product failure caused by abusive treatment, surface scratches, misuse, neglect or damage

due to handling or faulty installations. All wood naturally ages, darkens, changes in color, and mellows over time due

to exposure to light. While this color change is imperceptible from day to day, it may be signicant over a long period of

time, or due to amount of light the wood is exposed to. Imperfections such as small surface splits, small dark holes or

darker mineral streaks are natural and are not considered defects.

Toll free Customer Assistance at 877.659.2128

M - F: 7:30AM - 4:30PM PST.

LIMITED WARRANTY

MODEL: DT5025

DT5031

DT5037

DT5049

Package Contents

Part Description Quantity

A Vitreous china vanity top 1

PRE-INSTALLATION (continued)

PAGE 1
VITREOUS CHINA VANITY TOP A RONBOW COMPANY VANITY TOP MODEL: DT5025 DT5031 DT5037 DT5049 LIMITED WARRANTY WHAT IS COVERED All products in the package carry a One-Year warranty. This warranty applies only to the original purchaser and to the original installation of the product. WHAT IS NOT COVERED Damage caused during moving or during installation is not a defect or warranty issue and will not be considered as such.
PAGE 2
VITREOUS CHINA VANITY TOP A RONBOW COMPANY INSTALLATION 1 Vanity top preparation □□ Install the faucet into the pre-drilled locations of the vanity top (Faucet and Drain not included). □□ Follow the manufactures installation instructions to install the faucet and drain. □□ Do not over tighten the faucet system to avoid unnecessary damage to the vanity top. 2 Vanity preparation □□ The vanity should be set in place per the manufactures installation instructions (Vanity not included).
PAGE 3
VITREOUS CHINA VANITY TOP A RONBOW COMPANY INSTALLATION (continued) 3 Installing the vanity top It is highly recommended to have a second person for this step. □□ Apply a small bead of silicone compound to the top edge of the vanity. The silicone compound will act as an adhesive to secure the top to the vanity. □□ Carry the vanity top to the vanity location and set the top in place. □□ Always carry this product vertically to avoid excess stress to the vanity top.