Installation Sheet

Installation Sheet
RONBOW Materials Corp., All Rights Reserved.
Model: CB4092
For Sinks with overflow above counter
1
2
3
4
Attach p-trap to tailpiece.
From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty.
*There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty
instead.
See Figure 1.
See Figure 2.
Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop.
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Drain Cap
Overflow hole
Metal Nut
Thick rubber
washer
Tailpiece
Figure 2. (DRAIN Model: D8002)
• Position countertop opening to ensure
clearance between the lavatory,
faucet, and backsplash
• Cut counter top opening
• Cut-out max: 8-1/2" Diameter
• Set sink and seal with silicone or caulking
Figure 1.
countertop
Drain
Drain Installation Guide