User's Manual

RONDISH STRIP DOOR MONITOR DMS-02
6.4 USE OF DOOR CONTACTS (001/7 – 001/8)
DRAWING No.
001/7V3
TITLE
MODEL No.
Multi-door monitor/multi-floor
DMS-02
Magnetic contact closed (door monitor disabled).
Refer to J11
Door closed: pre-alarm sounds constant tone for
preset time (e.g. 15 seconds).
Door lock will operate (if fitted), but no full alarm
while door remains closed.
Magnetic door contact open (door monititor "armed").
If door opened, have instant full alarm.
Note: For full alarm, the alarm tone is activated, the door
monitor LEDs flash and a wireless signal is sent to the
Central Monitor (if employed).
NOTE:
PIR detector may be used as an alternative
to the magnetic door contact, or if no door/open area
Floor slab
Optional wireless
Monitor with LCD display
(CS-01 or CMU-02)
Floor 1
Floor 2
NOTE:
Due to the nature of electromagnetic signals and in
operating wireless door monitoring systems, it should
be noted that while a very high level of accuracy is
achieved, 100% accuracy can not be guaranteed.
USING DOOR CONTACTS, OR PIR TO AVOID FALSE
ALARMS
1. Magnetic contacts