User's Manual

Rondish Door Monitoring System DMS-02
6.4 USE OF DOOR CONTACTS (001/7 – 001/8)
DRAWING No.
001/8V3
TITLE
MODEL No.
Corridor/no door operation
DMS-02
PIR Detector
Fitting a PIR detector can help reduce unwanted alarms in a close environment.
For example, in a corridor with no doors, or open door operation
Connect PIR to strip monitor magnetic door contact terminals
Wire PIR 12V power in parallel with door strip power terminals
In this case, alarm is only allowed when the PIR is triggered.
NOTE: This is useful to reduce unwanted alarms when wristbands are carried near
to the door monitors e.g. on the other side of a wall, or (less likely) on a floor above, or below.
Optional CMU-02
or CS-01
with LCD display
NOTE:
Due to the nature of electromagnetic signals and in
operating wireless door monitoring systems, it should
be noted that while a very high level of accuracy is
achieved, 100% accuracy can not be guaranteed.
USING DOOR CONTACTS, OR PIR TO AVOID FALSE
ALARMS