User's Manual

RONDISH STRIP DOOR MONITOR DMS-02
6.5 QUICK SET-UP FOR DOOR STRIPS 001/9 – 001/11)
DOOR STRIP QUICK SET-UP
Rondish Patient Transmitter
(TXP-02(LP))
(a) Switch on/activate a patient tracking wristband by refering to the User Instruction (Page 8
section 3.3.1)
(b) Refer to USER INSTRUCTIONS section 3.0. Wearing a wristband on the wrist, test by walking towards
the door/zone from different directions. If set correctly, the door monitor should alarm before you
reach the door.
Note: Settings are approximate only, so repeat set-up and test again, if necessary.
DRAWING No.
001/11V3
TITLE
MODEL No.
Test the Patient Transmitter
DMS-02