User's Manual Part 1





Master Care Station and Zone Protektor Configuration:
,,0)& %&"+
1. Room Type Setting
Each call point is programmable to show various types of locations. Adjusting the
BAT code on the Master Care Station will change the default room type for call points
in the system.
“BAT” = Building Area Type.
There are 6 options - Use the A-Key to choose the desired setting:
< 1: Room > < 2: Flat > < 3: Ward > < 4: Home > < 5: Apt > < 6: Area >
2. Serial Output Communication
This setting is for the serial output at the rear of the Care Station (see diagram on
page 7).