User's Manual Part 2





5#!&  ".+.
Place the C-Key at the point indicated on the front of the WLSMCL-01 housing and
hold for around 6-8 seconds.
(a) It will first enter into record mode and a single “beep” will be heard.
(b) It will then emit 3 continuous short beeps followed by 2 short beeps.
(c) Then the WLSMCL-01 lights flash in 2 groups i.e. Red + Green and Orange +
White.
(d) The WLSMCL-01 then emits 3 long beep sounds to confirm “Memory Erased”.
5$ ;#<"=&& "
Placing The C-Key briefly at the point indicated on the front panel, the WLSMCL-01
first emits a short beep and then 3 short beeps to confirm “read-in mode”. If the light
unit receives no more activity for a period of 1 minute, it will automatically exit learning
mode and return to normal operation.
To read-in a programmed Call Point to the light unit, briefly apply the C-Key to the
Call Point over the Reset button for about 6 seconds to transmit the code to the Light
Special “Read-In” Code
Transmitted to Light Unit
MULTI-COLOUR
INDICATION LIGHT
(“READ-IN” MODE)
Apply C-Key Here
PROGRAMMED
CALL POINT
CAREGIVER KEY (C-KEY)