User's Manual Part 2





unit while it is still in “read-in”. This Call Point ID and data will be recorded in the light
unit memory.
Further associated Call Points in the area assigned to this light unit may then be read
into its memory while it is still in “read-in” mode by applying the C-Key to the reset
point on call point front panels.
5,!""+>!??7"##@!"+("&
Use the Rondish System Programmer, plug the Programming Cable into the Light
Programming Port (shown above) and turn on the power switch.
The program “string” is #000 B. Where: B = Buzzer on (1), Buzzer off (0)
The program “string” is #001 U TT. Where: U = Unit (0 = second, 1 = minute) and
TT = time from 0-60
 
WLSMCL-01 INDICATOR
LIGHT (FRONT VIEW WITH
LENS REMOVED)
Programming Port for
Program Cable