RP58 USER MANUAL
Xiamen Rongta Technology Co., Ltd. Catalog CATALOG ........................................................................................................................................ 2 1、PRODUCT INTRODUCTION ................................................................................................... 3 2、SUMMARY ................................................................................................................................. 4 2.1、MAIN FEATURES......................................
Xiamen Rongta Technology Co., Ltd. 1、PRODUCT INTRODUCTION Model: RP58 is a POS direct thermal receipt printer with easy operation and high cost effective, which is widely used in supermarket, hospital, restaurant, bank, oil station, turnpike etc. Safety Notice Please read carefully and strict compliance with use of following instructions before operating the printer. 1. Safety Warning Warning: Do not touch the cutter of printer.
Xiamen Rongta Technology Co., Ltd. (8) Use only supplied power adapter. (9) In order to ensure the printing quality and extend the life of printer, please use the recommendatory thermal paper or the one which has the same quality. (10) Please make sure the power of printer is off when plugging the connecting line. (11) Please keep the user manual for reference when using. 2、SUMMARY 2.
Xiamen Rongta Technology Co., Ltd. ●Interface: USB:Universal USB interface (Standard B)。 USB Cash Drawer Power Serial:DB9 female head interface,baud rate is 9600bps,data structure is no parity,8 bits of data and 1 stop bit, supports RTS/CTS and XON/XOFF handshake protocol. Serial Cash Drawer Power Parallel:25PIN (Male head) bidirectional parallel interface , 8 bit parallel interface, supports BUSY/nAck handshake protocol.
Xiamen Rongta Technology Co., Ltd. Ethernet Cash Drawer Power Cash Drawer Control:6 lines RJ-11 socket,out put: DC12V/1A Character : ASCII code character set:12×24 dots,1.25(W)×3.00(H)mm Chinese character:24×24 dots,3.00(W)×3.00(H)mm International Codepage:PC437、Katakana、PC850、PC860、PC863、PC865、 WPC1252、 PC866、PC852、PC858 and so on Printing Code:Supports UPC-A、UPC-E、EAN(JAN)13、EAN(JAN)8、 CODE39、CODABAR、ITF、CODE93、CODE128. ● Printing paper: Paper Type:Thermal paper Paper Width:57.5±0.
Xiamen Rongta Technology Co., Ltd. 6 ● MCBF:5×10 lines ● Emulation:ESC/POS Print Font:Supports ANK: 12 x24,9x17, Chinese: 24 x 24 Print Dot/Map:Supports the printing of different dots and maps ● Power Adapter: Adapter Input:AC 110V/220V,50〜60Hz Adapter Output:DC 12V/2A Printer Input:DC 12V/2A ● Net Weight:About 1.
Xiamen Rongta Technology Co., Ltd. Printer Power Adapter Power Cord Paper Roll CD Communication Cable 4.2、Printer Connection (1) To ensure the printer and PC is powered off and then insert the matched data connection lines to the interfaces (USB/Parallel/Serial/Ethernet) of the printer, the other ends are to the PC. (2) If the user fit out the electric opened cash drawer for the printer that could insert the RJ-11 connection line of it to the corresponding interface of the printer.
Xiamen Rongta Technology Co., Ltd. Notice: (1) Firstly, insert the power supply plug DC12V of printer; then connect the AC220V power; lastly, turn on the switch. Please operate it by the instruction steps; otherwise, it would damage the printer. (2) Use unsuitable power adapter would cause the bad print result; even though may cause the breakdown of printer. (3) Do not connect the telephone line to the interface of cash drawer; because it may result the damage for printer and telephone.
Xiamen Rongta Technology Co., Ltd. Function Description of Keystroke and Indicator Light: FEED Key: In the standby status, the printer would be continuous feed when pressing the feed key. Of course, the key is inefficacy when the printer is working. Press the feed key and switch on the power supply while the key is still under pressing, then the user could do the self-checking of printer. POWER LIGHT(Green): Light appears when connected to the power supply.
Xiamen Rongta Technology Co., Ltd. Self-checking procedure:Make sure the printer is connected to the power, then press the feed key and switch on the power supply while the key is still under pressing. At the same time, the printer begins to self-checking. Please loosen the key within five seconds and the printer would print the self-testing list after it.
Xiamen Rongta Technology Co., Ltd. 6 DSR Serial interface of printer DB9 4 DTR Serial interface of POS PC DB9 7、Parallel Interface RP58 parallel interface is 25pin, 8 bit parallel transfers, supports BUSY/nAck handshake protocol.
Xiamen Rongta Technology Co., Ltd. Pin Number Signal Source Specification 1 TX+ Transmit differential line + 2 TX- Transmit differential line- 3 RX+ Receive differential line+ 4 NC No function 5 NC No function 6 RX- Receive differential line- 7 NC No function 8 NC No function 9、Cash Drawer Interface Cash drawer interface adopt RJ-11 standard, 6 lines socket and the output of it is DC 12V/1A.
Xiamen Rongta Technology Co., Ltd. Procedure of maintaining the print head is listed below: (1)Turn off the power supply and open the top cover. Remove the paper if necessary. (2)Please wait for the cooling of print head if it just finish printing. (3)Use the cotton cloth and dip it in the absolute ethyl alcohol to clean the surface of print head. (4)When the absolute ethyl alcohol is completely volatilized, please close the top cover and restart the printer. 10.
Xiamen Rongta Technology Co., Ltd. (2)Use the cotton cloth and dip it in the absolute ethyl alcohol to clean the surface of print roll. (3)When the absolute ethyl alcohol is completely volatilized, please close the top cover. Notice: (1)The power supply of printer should be turned off when the routine maintenance. (2)Do not use hand or metal to touch the surface of print head and not use tweezers to scratch the superficies of print head, print roll or sensor.