Phau Ntawv Qhia

USER MANUAL
9
Tools will not run.
Air flows freely
from exhaust
- One or more motor
vanes stuck due to
material build up.
- Pour air tool lubricating tool into air
inlet.
- Operate tool in short bursts of forward
and/or reverse rotation where applicable.
- Tap motor housing gently with plastic
mallet.
- Disconnect supply. Free motor by
rotating drive shank manually where
applicable
Tool will not shut
off
- "O" rings throttle
valve dislodged from
seat inlet valve.
- Replace "O" ring.
Note: Repairs should be carried out by a qualified person.