Phau Ntawv Qhia

USER MANUAL
5
7- Always keep your air tool clean and lubricated. Daily lubrication is
essential to avoid internal corrosion and possible failure.
8- Do not wear watches, rings bracelets or loose clothing when using air tools.
9- Using only light weight coil hoses from a tool to the wall or compressor
coupling. Do not t quick change couplings onto the machine as vibration
can cause the coupling to fail.
10- Do not overload the machine. Allow the tool to operate at its optimum
speed for maximum efciency.
11- Do not increase the air pressure above the manufacturers recommended
level, as excessive overload can cause the machine casing to split. Also,
this creates excessive wear on moving parts and possible failure.
12- In the interests of safety and possible damage to the machine/operator,
always ensure that the machine has stopped before putting it down after use.
13- Always ensure that the work piece is rmly secured leaving both hands
free to control the machine.
14- Always ensure that the accessories such as blades, discs, sockets,
etc. are designed for use with the machine. Also, correctly and securely
fastened before connecting the machine to the air supply.
COMPATIBLE COMPRESSOR AND AIR TOOL:
Always ensure the use of appropriately matched air tools and compressors.
The compressor should be able to supply a minimal air delivery of 9.5
SCFM (90PSI) to ensure the compressor can run continuously with the
VALU-AIR Air-Powered Impact wrench. Using tools or a combination of
tools that together or separately require air pressure more than that of
which the air compressor can deliver will reduce performance and could
void the compressor.