Assembly Instruction

Steel Bed and Twin Day Bed Assembly Instructions
List of parts: 1 - headboard
1 - footboard
2 - side rails
10 - slats (twin/full)
12 - slats (queen/king/california king)
Tools needed: rubber mallet
Directions:
headboard
footboard
1. Hold headboard upright near its desired placement.
2. With plastic pieces facing in, place one side rail tab in the metal pocket
of headboard. Repeat for other side.
3. Attach footboard to both rails in the same manner as headboard.
4. Place slats onto the side rails matching the slots in each slat to the rivet
on the side rails.
5. Place mattress on slats.
Note: When disassembling, use rubber mallet to remove side rail tab
from metal pocket.
®