Instructions / Assembly

1. Determine the exact length of track needed for your installation.

3. Using the saw included in your kit, cut the marked piece of track to

achieve the desired total length.

• Please note: the best appearance will be achieved by making a straight clean

90 degree cut to the track. !The end of the track that has been cut will become

one of the ends of the completed track installation."

4. Using the track sections as your template, hold the track to the ceiling

where it is to be installed and mark the holes on the ceiling for drilling.

• Please note: this process will be easier if you have a second person hold up 1

end of the track while marking the holes."

• Using a ¼ inch drill bit, drill the holes in the ceiling at the marked locations

and insert the mounting screw plastic anchors."

5. Install an end cap on the ﬁrst section of track to be installed. "

• Please note, if your ﬁrst section of track is being installed tight to an end

wall, be sure to install the end cap here ﬁrst.

Installing Ceiling Track is easy. Whether the track is needed for privacy, storage, or workspace, Ceiling Track Sets can

be set up in minutes! Instructions for installing your ceiling track can be found below:

STEP 1:

STEP 3:

STEP 4:

STEP 5:

2. Track sections are 6ft or 3ft long. If the ﬁnal track length needs to be

shortened, mark the track at the desired cutting point. !

STEP 2:

CONTINUED

PAGE 1
Installing Ceiling Track is easy. Whether the track is needed for privacy, storage, or workspace, Ceiling Track Sets can be set up in minutes! Instructions for installing your ceiling track can be found below: STEP 1: 1. Determine the exact length of track needed for your installation. STEP 2: 2. Track sections are 6ft or 3ft long. If the final track length needs to be shortened, mark the track at the desired cutting point. STEP 3: 3.
PAGE 2
STEP 6: 6. Using the screws, attach the track to the ceiling. STEP 7: 7. Place as many roller hooks in the first piece of installed track as there are grommet rings in your curtain. STEP 8: 8. Install the remaining sections of track (if your installation requires more than 1 piece). • Make sure that each additional track section is aligned straight with the installed track and that there is no gap between track sections. • Be sure to install the other end cap at the opposite end of the track. STEP 9: 9.