Specifications

ManualsBrandsRoper ManualsDryerGas 120-Volt

ROPER’”

Appliances

IMPORTANT:

Installer: Leave Installation Instructions with the appliance.

Homeowner: Keep Installation Instructions for future reference

Save Installation Instructions for local electrical inspector’s use.

Part No.3393136 Rev. A

Summary of content (5 pages)

PAGE 1
ROPER’” Appliances IMPORTANT: Installer: Leave Installation Instructions with the appliance. Homeowner: Keep Installation Instructions for future reference Save Installation Instructions for local electrical inspector’s use. Part No.3393136 Rev.
PAGE 2
Before you start... Fire Hazard Never install dryer up against draperies or curtains or on carpet. . Keep any and all items from falling or collecting behind the dryer. l Replace all access panels before operating dryer. Failure to follow these instructions could result in a fire or explosion. . If you smell gas: 1. Open windows. 2. Don’t touch electrical switches, 3. Extinguish any open flame. 4. Immediately call your gas supplier. .
PAGE 3
Electrical reaufrements Electrical Shock Hazard l Electrical ground is required on this appliance. l Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. l Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded. Do Not modify the power supply cord plug. lf it will not fit the outlet, have a proper outlet installed by a qualified electrician. l Do Not use an extension cord wit this appliance.
PAGE 4
Now start... 1. Open the shut - off valve in the gas supply line. Take tape off of front corners of dryer 2 Open dryer and n remove the literature and parts packages. (If your dryer has a drying rack it should be removed also.] Remove all parts from the plastic packages. Line these up next to your tools so each part is there when you need it. Check to see that you have these parts: 4 legs 1 grounding wire or socket to finish turning the legs until you have reached the diamond mark.
PAGE 5
Recessed and closet installation instructions If dryer does not operate properly... Recessed front view If dryer will not operate, check the following to be sure that: Fire/Health Hazard Exhaust the dryer to the outside to prevent exposure to substances in the gas fuels and combustion which may be harmful to your health. l If dryer is installed in a closet, the dryer MUSTbe exhausted outside. Failure to do so may result in a fire. -II- l --II0”’ -1 0” I-1’ A. B. C. D. min.