Product specifications

GALAXYNASLX CONFIGURATION AND SYSTEM INTEGRATION GUIDE
24 Section 2 Basic Setup
monitor. Press and hold the front panel Power button for 3 seconds. See figure 2.2
2.2 Pre-configuration Setup
2.2.1 First time operation of GalaxyNASLX Figure 2.3
The booting of the GalaxyNASLX will bring you to a text menu screen [see figure 2.3]showing
you information on its network IP settings. If your network has a DHCP server then the
GalaxyNASLX should retrieve and assign network IP settings to the ethernet cards
automatically. If your network does not contain a DHCP server, the GalaxyNASLX will start
with the default settings: IP address 192.168.0.220 and 192.168.1.220 with a netmask of
255.255.255.0. These values can be changed manually at the server terminal by using the
following key sequence: left "CTRL" + left "ALT" + "N" and then hitting the "ENTER" key. You
will then be prompted for the correct IP address and subnet mask.
All other available functions on of the console will appear after pressing F1 key
[see figure 2.4].
Figure 2.3
Figure 2.4