Product specifications

GALAXYNASLX CONFIGURATION AND SYSTEM INTEGRATION GUIDE
52 Section 3 Menu Functions
"Note: The access to WEB GUI can also be blocked, by setup->Administrator in the
function “Administrator access”. If in the “Rorke Data NAS” system there is only one
network card installed, the “www” option must remain active.
3.3.3 Function “Create Ethernet team” Figure 3.16
Function “Create ethernet team” include failover protection, increased bandwidth through
aggregation, and balancing of traffic among team members. Ethernet team modes are AFT,
SFT, ALB, RLB, SLA and 802.3ad.
Ethernet team modes:
• Adapter Fault Tolerance (AFT) Allows mixed models and mixed connection speeds
as long as there is at least one Intel® PRO server adapter in the team. A 'failed'
Primary adapter will pass its MAC and Layer 3 address to the failover (secondary)
adapter. All adapters in the team should be connected to the same hub or switch with
Spanning Tree (STP) set to Off.
Figure 3.16