Product specifications

GALAXYNASLX CONFIGURATION AND SYSTEM INTEGRATION GUIDE
57 Section 3 Menu Functions
address_IP --> IP of NAS server
SysUpTime --> OID with system uptime information
To use SNMP from the command line you have to know OID's, for example:
ssCpu (processor load), mem (memory info), Location.
But it is not the best choice to retrieve info from command line. You have to install an
SNMP client, so you can easily read any information you want.
From MS Windows you can use following Windows Clients: PRTG, MIB Browser Professional,
SNMP MIB Query Manager and INFTRAF.
" Notes: If you can't retrieve information from the SNMP client, you can check
NAS_ip/check_sys/index.html. There are SystemLoad, CPU, Memory, Swap and Uptime.
3.5.0 ‘Setup’ ‘UPS’ Functions
3.5.1 Function “UPS configuration ” Figure 3.19
In the UPS menu you can configure a UPS device (Uninterrupted Power Supply). For the
connection of the UPS device to the NAS server, the USB port is most frequently used. In the
settings you can select the UPS model, cable type, connection port and the length of the time
out [ the UPS battery supports the power requirements of the GalaxyNASLX based on the
rating of the UPS]. The time-out defines the time between a power failure and the moment the
system will shut down. UPS support 3 modes:
Figure 3.19