Product specifications

GALAXYNASLX CONFIGURATION AND SYSTEM INTEGRATION GUIDE
61 Section 3 Menu Functions
"Note: 1. It is possible to edit the time of synchronization. If you want to edit
shares to synchronize please delete this schedule and add new.
2. It is possible to perform only one synchronization at a time. If you
schedule a few synchronizations at the same time, only one will be
done.
3.6.5 Function “Unit Manager” Figure 3.22
L Important: Your Volume Groups have been preconfigured by Rorke and shipped
as vg0, vg1, etc and are were based on a 2 TeraByte maximum group size. Newer
Volume Groups will not have this 2TB size restriction. The following procedure would
be necessary if you are establishing your Volume groups from scratch.
Clik on the branch “units” in the left part of page. Here you will find a list of all available units
(raid-array luns) and their usable disk size. In order to integrate available units into the share
volume (volume group), use the “add” button, after which the unit will be formatted.
L Important: Once the added unit is integrated into a Volume Group, it cannot be
changed or removed using Web management. You need to use extended tools in the basic
console commands . Be aware all data will be lost if this is done!!
Next, the page will be reloaded (see figure 3.22a), and the status field will show your units as
“in use” with a new group name e.g. “vg0”. The Volume Group is the equivalent of a physical
disk from the system point of view. It is also possible to combine two (or more) units into one
Volume Group by choosing one of actually existing groups like “vg0”, or by choosing “new”
option which will create new group “vg1” after using “add” button.
Figure 3.22
Figure 3.22a