Product manual

Galaxy G3G12 / G3G16 Installation and Hardware Reference Manual
103 Section 4 Maintenance with GAM
2. Click on the Submit button.
Stopping Web Server service
To stop the Web Server service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting Web Server service
To start or restart the Web Server service, click the Start or Restart button.
Making Telnet Settings
Galaxy3G’s Telnet service enables you to access Galaxy3G’s Command Line Interface (CLI) through a
network connection. To make Telnet settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools
icon.
3. Click the Telnet Setting link in Management View.
4. Enter the Telnet Port number.
2300 is the default.
5. Enter the Maximum Number of Connections.
4 is the default.
6. Enter the Session Time Out interval.
24 minutes is the default.
7. Click the Submit button.
8. Click OK in the confirmation box to restart the Telnet service with your changes.
Changing the Startup Setting
1. Under Startup Type:
• Click on the Automatic option to start the service automatically during system startup.
Recommended.
• Click on the Manual option to start the service manually (the service does not start during system
startup).
2. Click on the Submit button.
Stopping Telnet service
To stop the Telnet service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting Telnet service
To start or restart the Telnet service, click the Start or Restart button.
Making SNMP Settings
Galaxy3G’s SNMP service enables the SNMP browser to obtain information from the Galaxy3G. The Trap
Sink is where SNMP events are sent and can be viewed.
To change the SNMP settings:
1. Click the Subsystem
icon in Tree View.
2. Click the Administrative Tools
icon.
3. Click the SNMP Management link in Management View.
4. Enter the SNMP Port number.
161 is the default.