Product manual

Galaxy G3G12 / G3G16 Installation and Hardware Reference Manual
105 Section 4 Maintenance with GAM
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools
icon.
3. Click the CIM Setting link in Management View.
4. Click the Start button to start the CIM service.
5. To enable CIM using a HTTP connection:
• Choose the Yes option
• Enter a port number in the field provided (5988 is the default)
6. To enable CIM using a HTTPS connection:
• Choose the Yes option
• Enter a port number in the field provided (5989 is the default)
7. To enable authentication for your CIM connection(s):
• Choose the Yes option
• Enter the old password in the field provided (password is the default)
• Enter a new password in the field provided
To change your password, the CIM service must be running. See Starting or Restarting CIM service.
There is only one user. The default name is “cim.” No changes are possible.
8. Click the Submit button.
Changing the Startup Setting
1. Under Startup Type:
• Click on the Automatic option to start the service automatically during system startup.
Recommended.
• Click on the Manual option to start the service manually (the service does not start during system
startup).
2. Click on the Submit button.
Stopping CIM service
To stop the CIM service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting CIM service
To start or restart the CIM service, click the Start or Restart button.
Making Netsend Settings
Galaxy3G’s Netsend service sends Galaxy3G subsystem events in the form of text messages to your Host
PC and other networked PCs. This service is normally Stopped and set to Manual start. See Netsend R.
To change the Netsend settings:
1. Click the Subsystem
icon in Tree View.
2. Click the Administrative Tools
icon.
3. Click the Netsend link.
4. Click the Start button to start the Netsend service.
5. Click the Submit button.
Adding Netsend recipients
See Netsend R. To add a Netsent recipient:
1. In the Recipient Address field, type the IP address of the recipient PC.
2. Under Recipient filter, select the lowest level of Severity to be reported for each event.