Product manual

Galaxy G3G12 / G3G16 Installation and Hardware Reference Manual
113 Section 4 Maintenance with GAM
4.19 Restarting the Subsystem
You can only do part of this function in GAM. Additional action is required, as described below. To restart the
subsystem
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools
icon.
3. Click the Shutdown link in Management View.
A Shutdown or Restart tab will appear.
4. On the Shutdown or Restart tab, select Restart from the dropdown menu.
5. Click the Submit button.
6. In the warning box, click the OK button.
7. In the confirmation box, type the word confirm in the field provided.
8. Click the OK button.
When the controller shuts down, your GAM connection will be lost.
9. Wait for two to three minutes.
• In your browser, log into GAM once again.
If you cannot log in, wait for 30 seconds, and try again. Repeat until login is successful.
Monitoring the Restart
To monitor a restart, you must use the Command Line Interface (CLI) though a serial connection to the
Galaxy3G.
At the “administrator@CLI>” prompt, type shutdown -a restart.
When the “Login:” prompt appears, the restart is finished.