Product manual

Galaxy G3G12 / G3G16 - Installation and Hardware Reference Manual
146 Section 5 Management with CLU
2. The telnet login screen appears:
3. At the Login prompt, type the user name and press Enter.
The default user name is administrator.
At the Password prompt, type the password and press Enter.
The default password is password.
4. The CLI screen appears.
1. At the CLI prompt, type menu and press Enter
The CLU Main Menu appears.
Quick Setup – A sequence of four steps to setup System Date & Time, Management Port, and RAID
Configuration.
Subsystem Management – View controller information, lock/unlock the controller, set date and time, and
monitor the enclosure.
Physical Drive Management – View disk drive assignments and parameters, change disk drive cache
settings and command queuing, and locate a physical drive.
Disk Array Management – View disk array information, create and delete disk arrays, transport, rebuild,
PDM, and transition functions, and locate a disk array, create and delete logical drives.
Logical Drive Management – View logical drive information, name logical drives, initialization and
redundancy check, and locate a logical drive.
Network Management – Set IP addresses for Management Port, gateway, and DNS server; subnet mask.
Fibre Channel Management – Node information, Port information, settings and statistics, list of logged-
in devices, list of initiators.
SAS Management – Node information, Port information, settings, status, and statistics; SFP information, list
initiators.
Background Activity – Settings for Media Patrol, Auto Rebuild, Rebuild, Migration, PDM, Transition,
Synchronization, Initialization, Redundancy Check rate, and thresholds.
Event Viewer – View the event logs.
Additional Info and Management – Spare Drives, LUN Mapping, User management, EMail, SLP,
Webserver, Telnet, SNMP, CIM, and Netsend settings, firmware flash, clear statistics and restore factory
default settings.
Buzzer – Enable, disable or silence the buzzer (audible alarm).
Fig 5.1a Galaxy 3G CLU Main Menu