Product manual

Galaxy G3G12 / G3G16 - Installation and Hardware Reference Manual
185 Section 5 Management with CLU
5.15 Working with LUN Mapping
LUN Mapping includes the following functions:
• Viewing a List of Initiators
• Enabling LUN Mapping
• Creating an Initiator
• Mapping a LUN to an Initiator
• Deleting an Initiator
Viewing a List of Initiators
LUN Mapping must be enabled in order for Galaxy3G to recognize a Fibre Channel or SAS initiator. To view
a list of initiators:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
A list of the current initiators appears.
Enabling LUN Mapping
To enable LUN mapping:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
A list of the current Fibre Channel or SAS initiators appears.
LUN Mapping must be enabled in order for Galaxy3G to recognize the initiator. If LUN Mapping is currently
disabled, highlight Enable LUN Mapping and press Enter.
Creating an Initiator
You must add an initiator to the Galaxy3G’s initiator list in order to use the initiator to create a LUN. You can
also add initiators under Fibre Channel Management see Adding a Fibre Channel Initiator or SAS
Management, see Adding a SAS Initiator
To create (add) a new initiator:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight Create New Initiator and press Enter.
4. Type the name of the initiator.
• Fibre Channel – A Fibre Channel initiator name is the World Wide Port Name of the
device and is composed of a series of eight, two-digit hexadecimal numbers.
• SAS – A SAS initiator name is the SAS address of the HBA card in the Host PC. Obtain
the initiator name from the initiator utility on your host system.
5. Obtain the initiator name from the initiator utility on your host system.
• Note that the initiator name you input must match exactly in order for the connection to
work.
6. Press Ctrl-A to save the initiator.
Note
LUN Mapping must be enabled in order for Galaxy3G to
recognize the initiator.